Vestel Onboarding Guide
  • 04 Mar 2024
  • 1 Minute to read
  • Contributors
  • Dark
    Light
  • PDF

Vestel Onboarding Guide

  • Dark
    Light
  • PDF

Article summary

This guide describes how to onboard Vestel chargers with Tap.

Onboarding in this context means getting the charger communicating with Tap. If you are looking for a complete guide for setting up an account and configuring your locations, see our Quick Start Guide.

  1. In the Tap app: Locations > connect new charger
    locationsHome1.png

  2. Select Vestel.

  3. Copy the URL provided.

  4. Turn on the Vestel charger.

  5. Connect your laptop or mobile device to the charger's wifi.

Wifi network name: Serial number of the charger
Password: Chargebox-ID

  1. Open a web browser on your laptop or phone. Enter the charger's IP as the browser URL.

IP: 192.168.1.1

  1. Login using the following credentials.

User Name: admin
Password: admin
vestel login.png

  1. You are now in the configuration interface. Change OCPP Connection from Disabled to Enabled. OCPP Version should stay as OCPP 1.6.
    vestel config1.png

  2. In Central System Address, paste the URL you copied from Tap.

  3. In Charge Point ID, enter your desired charger ID.

  4. Set AuthorizeCacheEnabled to True. This can improve the offline performance of you charger, as it will allow it to store valid tokens in case the charger goes offline.
    vestel config2.png

  5. Click Save.

  6. Return to the Tap app. After a minute the charger should appear and you can proceed with onboarding.
    chargerOnboard.png