- DarkLight
- PDF
This guide describes how to onboard Enelion chargers with Tap.
Onboarding in this context means getting the charger communicating with Tap. If you are looking for a complete guide for setting up an account and configuring your locations, see our Quick Start Guide.
To connect Enelion chargers, you will need to be physically located at the charger, as it is configured via the charger's wifi hotspot.
In the Tap app: Locations > connect new charger
Select Enelion.
Copy the URL provided.
Power up the charger.
In order to connect to the WiFi hotspot of Enelion Bridge, use a computer or telephone to scan the available WiFi networks. The broadcast network is named “EnelionChargerXXX” where XXX stands for the last three characters of the serial number of the communication module. By default, the broadcast network is not password protected. Selecting this network will connect to the device.
Open a web browser on your device. Enter the address http://192.168.8.8 in the address bar and log in.
To change the OCPP setting you have to log in as an administrator. Username is “admin” and default password is “admin”.
Make sure that the Enelion Bridge has Internet connection. Check that in Network > Overview.
Navigate to OCPP > Connection > Connect to specified Management System
In the OCPP address field, enter the URL you copied from Tap.
In the StationID field, enter any name you wish for the charger.
Click save to connect to the Tap server.
In the Configuration keys section you can edit the values of the keys defined in
the OCPP 1.6 specification. Editing them here is equivalent to sending a ChangeConfiguration message via OCPP.
Return to the Tap app. After a minute the charger should appear and you can proceed with onboarding.