Loxone Onboarding Guide

  • Published on Nov 24, 2024
  • 1 minute(s) read
  • DP
 Prev Next

This guide describes how to onboard Loxone chargers with Tap.

Onboarding in this context means getting the charger communicating with Tap. If you are looking for a complete guide for setting up an account and configuring your locations, see our Quick Start Guide.

To connect Loxone chargers, you will need access to the Loxone Miniserver configuration tool.

  1. In the Tap app: Locations > connect new charger
    locationsHome1.png

  2. Select ETAPpro.

  3. Copy the URL provided.

  4. Open the Loxone Miniserver configuration tool.

  5. Add an OCPP Server Connector within the Network Periphery.
    Loxone connector.png

Loxone miniserver.png

  1. Open the newly added OCPP Server Connector. Navigate to Settings > Server Address, and paste the URL you copied from Tap.
    Loxone ocpp address.png

  2. Select the new ‘Charging_point_1’ and rename this to TapElectric.

  3. In the new charger, navigate to Settings and enter your desired Charging point ID.
    Loxone charger ID.png

  4. Connect the newly created API Connector (AC) to the Loxone Wallbox and the NFC Code touch.
    Loxone diagram.png

  5. Set the Authentication on 4 = OCPP.
    Loxone auth.png

  6. Return to the Tap app. After a minute the charger should appear and you can proceed with onboarding.
    chargerOnboard.png