Easee onboarding guide
Laatst bewerkt:
Deze inhoud is nog niet vertaald.
You can connect Easee chargers in two ways: sign in with your Easee account, or enter the charger ID and set Tap as the operator in Easee Cloud. Add the charger to your own Individual or Organisation Account. Installers: switch into your customer’s account first.
Choose Easee
Section titled “Choose Easee”-
With Manage selected at the top, open your location on the Home tab, tap Chargers, then Connect new chargers. For a new location, tap + below your locations on the Home tab.
-
Search for Easee and tap Select.

-
Locations > Connect new chargers, or click Connect new chargers on a location page.
-
Under Choose your charger brand, search for Easee and click it.

Option 1: Sign in with Easee
Section titled “Option 1: Sign in with Easee”Signing in imports your chargers and sets Tap as their operator.
-
On the Sign in with Easee tab, sign in with your Easee account.

-
Under Chargers found, select the chargers to connect.
-
Click Sign in with Easee and sign in with your Easee account.

-
Select the chargers to connect.
Option 2: Enter the charger ID
Section titled “Option 2: Enter the charger ID”-
In Easee Cloud, set Tap Electric as the operator for your chargers.
-
Back in Tap, open the Enter charger ID tab.
-
Enter the charger ID and model.

After a minute, the charger shows under Added chargers.
- In Easee Cloud, set Tap Electric as the operator for your chargers.
- Back in Tap, choose the Charger template and enter the Charger ID.
- Click + Add.
After a minute, the charger connects and you can continue.
Set the location
Section titled “Set the location”-
Under Where is the charger?, choose New location and enter the address, or pick an Existing location. Check the map pin.

-
On You’re all set, choose what to do next, or tap Go to my location.

- Complete the Set location and Location settings steps.