Alfen onboarding guide - MyEve App
Last updated:
You need an Alfen account in the MyEve app. Add the charger to your own Individual or Organisation Account. Installers: switch into your customer’s account first. Setting up a newer Alfen charger? See Alfen onboarding guide - Eve Install App or Alfen onboarding guide - ACE Service Installer.
Set Tap as the backoffice in MyEve
Section titled “Set Tap as the backoffice in MyEve”- Open the MyEve app and select your charger.
- In the OCPP backoffice list, select Tap Electric.
- Reboot the charger.
Add the charger in Tap
Section titled “Add the charger in Tap”-
With Manage selected at the top, open your location on the Home tab, tap Chargers, then Connect new chargers. For a new location, tap + below your locations on the Home tab.
-
Search for Alfen - MyEve App and tap Select.

-
Enter the charge point ID and tap Add.
-
Locations > Connect new chargers, or click Connect new chargers on a location page.
-
Under Choose your charger brand, search for Alfen - MyEve App and click it.
-
Under Charger ID, enter the charge point ID and click + Add.

After a minute, the charger shows up and you can set its location.
Set the location
Section titled “Set the location”- Under Where is the charger?, choose New location and enter the address, or pick an Existing location.
- On You’re all set, choose what to do next, or tap Go to my location.
- Click Continue, then complete the Set location and Location settings steps.
Using a Tap SIM card
Section titled “Using a Tap SIM card”If your charger has a Tap Electric SIM card, enter these details in the MyEve app:
- APN name: Tapelectric
- APN user: user
- APN password: pass