VCHRGD onboarding guide
Last updated:
You need the VCHRGD Installer app and the installer password from the install kit. Lost the password? Call VCHRGD technical support and quote the Magic No. for a temporary password. Add the charger to your own Individual or Organisation Account. Installers: switch into your customer’s account first.
Copy your Tap URL
Section titled “Copy your Tap URL”-
With Manage selected at the top, open your location on the Home tab, tap Chargers, then Connect new chargers. For a new location, tap + below your locations on the Home tab.
-
Search for VCHRGD and tap Select.

-
Copy the URL.
-
Locations > Connect new chargers, or click Connect new chargers on a location page.
-
Under Choose your charger brand, search for VCHRGD and click it.
-
Copy the Server URL.

Set Tap as the server in the VCHRGD Installer app
Section titled “Set Tap as the server in the VCHRGD Installer app”-
Open the VCHRGD Installer app. When asked, allow Bluetooth and location access. The app needs them to find the charger.
-
Select your charger from the list of Bluetooth devices. If the connection times out, wait and select the charger again.
-
Enter the installer password and tap OK.
-
Select Full configuration.

-
Select your Wi-Fi network and connect.
-
Set Charge Mode to APP.
-
Set Server URL to Manual Entry and paste the full URL you copied from Tap into the field that appears.

-
Tap Set. You see Set Successfully and the app disconnects from the charger. If it doesn’t, tap Back, then Disconnect.
-
The charger reboots automatically after the app disconnects.
After a minute, the charger appears in Tap.
Set the location
Section titled “Set the location”- Under Where is the charger?, choose New location and enter the address, or pick an Existing location.
- On You’re all set, choose what to do next, or tap Go to my location.
- Under Your chargers, check that the charger is listed, then click Continue.
- Complete the Set location and Location settings steps.