Skip to content

Garo Entity onboarding guide

Last updated:

Instructions for

You need the Garo Connect app. Add the charger to your own Individual or Organisation Account. Installers: switch into your customer’s account first.

Set Tap as the backend in the Garo Connect app

Section titled “Set Tap as the backend in the Garo Connect app”
  1. Open the Garo Connect app.

  2. Select the location you want to connect.

  3. Select the last master charger in the list. Slave units linked to a master connect automatically.

  4. Tap Third-party CPO/OCPP settings (optional).

    The Installation tab in Garo Connect

  5. In GaroDeviceId, enter a name for the charger. Copy it: you’ll paste it into Tap.

  6. In GaroRemoteCsmsUrl, tap Select from list and choose Tap Electric.

  7. Tap Update changes, then Reboot device.

  8. Repeat these steps for every master charger in the list.


  1. With Manage selected at the top, open your location on the Home tab, tap Chargers, then Connect new chargers. For a new location, tap + below your locations on the Home tab.

  2. Search for Garo Entity and tap Select.

    Selecting your charger brand in the Tap app

  3. Paste the GaroDeviceId as the charger ID and tap Add.

After a minute, the charger shows up and you can set its location.


  1. Under Where is the charger?, choose New location and enter the address, or pick an Existing location.
  2. On You’re all set, choose what to do next, or tap Go to my location.