Skip to content

Zaptec onboarding guide

Last updated:

Instructions for

You need a Zaptec account for the Zaptec Portal (the same login as the Zaptec app). Add the charger to your own Individual or Organisation Account. Installers: switch into your customer’s account first. Managing chargers for a ManCo? See Zaptec (for ManCos) onboarding guide.

  1. With Manage selected at the top, open your location on the Home tab, tap Chargers, then Connect new chargers. For a new location, tap + below your locations on the Home tab.

  2. Search for Zaptec and tap Select.

    Selecting your charger brand in the Tap app

  3. Copy the URL.


Set Tap as the server in the Zaptec Portal

Section titled “Set Tap as the server in the Zaptec Portal”
  1. Sign in to the Zaptec Portal.

  2. Open Installations and select the installation. Make sure its chargers are online and not charging.

  3. On the Settings tab, open Authentication (in Dutch: Aanmelding).

  4. Select OCPP-J 1.6 authentication.

  5. Paste the Tap URL into URL and make sure it ends in /{deviceId}, e.g. wss://ocpp.tapelectric.app/abcdefgh1234/{deviceId}. Keep {deviceId} exactly as it is: don’t replace it with the charger’s serial number. You don’t need an Initial device password.

  6. Tick Authorisation required.

  7. Choose whether to tick Disable authorisation when charging stations are offline. Drivers can then charge while the charger is offline, but you can’t be reimbursed for those sessions.

    OCPP-J 1.6 authentication in the Zaptec Portal

  8. Click Save.

  9. On the Circuits tab, select the charger and check that Authorisation required is on.

  10. Reboot the charger.

After a minute, the charger appears in Tap.


  1. Under Where is the charger?, choose New location and enter the address, or pick an Existing location.
  2. On You’re all set, choose what to do next, or tap Go to my location.