waEV-charge onboarding guide
Last updated:
You need the waEV-charge mobile app and the Access Code from the back of the charger manual. Add the charger to your own Individual or Organisation Account. Installers: switch into your customer’s account first.
Copy your Tap URL
Section titled “Copy your Tap URL”-
With Manage selected at the top, open your location on the Home tab, tap Chargers, then Connect new chargers. For a new location, tap + below your locations on the Home tab.
-
Search for waEV-charge and tap Select.

-
Copy the URL.
-
Locations > Connect new chargers, or click Connect new chargers on a location page.
-
Under Choose your charger brand, search for waEV-charge and click it.
-
Copy the OCPP URL. The screen also shows Auth. Key: NULL.

Set Tap as the backend in the waEV-charge app
Section titled “Set Tap as the backend in the waEV-charge app”- Open the waEV-charge app and select Installer Setup.
- Select your charger from the device list.
- Enter the Access Code from the back of the charger manual.
- Select Advanced Settings.
- Select OCPP URL and paste the URL you copied from Tap.
- Select Auth. Key and enter NULL.
- Reboot the charger.
After a minute, the charger appears in Tap.
Set the location
Section titled “Set the location”- Under Where is the charger?, choose New location and enter the address, or pick an Existing location.
- On You’re all set, choose what to do next, or tap Go to my location.
- Under Your chargers, check that the charger is listed, then click Continue.
- Complete the Set location and Location settings steps.