Skip to content

Circontrol onboarding guide

Last updated:

Instructions for

You need to be at the charger with a Windows laptop and a LAN cable. Add the charger to your own Individual or Organisation Account. Installers: switch into your customer’s account first.

  1. With Manage selected at the top, open your location on the Home tab, tap Chargers, then Connect new chargers. For a new location, tap + below your locations on the Home tab.

  2. Search for Circontrol and tap Select.

    Selecting your charger brand in the Tap app

  3. Copy the URL.


  1. Connect your laptop to the charger with a LAN cable.

  2. Download IPSetup.exe and run it.

  3. Enter an IP address in the same range as your laptop. A direct connection needs a static IP address.

    The IPSetup tool

  4. Enter the MAC address from the label inside the charger panel.

  5. Click Configure. The charger’s setup page opens in your browser.

  6. Open the Integrations tab. If asked to sign in, use the default web login from Circontrol’s manual.

  7. Go to General.

  8. In Available Integrations, select OCPP 1.6 JSON. Not in the list? Contact Circontrol.

  9. In Charge Point ID, enter a unique name for the charger.

  10. In Connection URL, paste the URL from Tap.

    Integrations settings on the Circontrol setup page

After a minute, the charger appears in Tap.


  1. Under Where is the charger?, choose New location and enter the address, or pick an Existing location.
  2. On You’re all set, choose what to do next, or tap Go to my location.