Skip to content

Injet (Hub - DC) onboarding guide

Last updated:

Instructions for

You need access to the Injet web portal: ask Injet for your login. Add the charger to your own Individual or Organisation Account. Installers: switch into your customer’s account first.

  1. With Manage selected at the top, open your location on the Home tab, tap Chargers, then Connect new chargers. For a new location, tap + below your locations on the Home tab.

  2. Search for Injet (Hub - DC) and tap Select.

    Selecting your charger brand in the Tap app

  3. Copy the URL.


Set Tap as the OCPP server in the Injet portal

Section titled “Set Tap as the OCPP server in the Injet portal”
  1. Make sure the charger is powered up and connected to the internet.

  2. On a laptop, go to the Injet web portal and sign in with the login from Injet.

  3. Go to DC Pile > Pile Set (on some accounts: Charger Set).

    Pile Set in the Injet portal

  4. Set Protocol Version to OCPP 1.6J and leave OCPP Code empty.

  5. In OCPP Url, paste the URL from Tap.

  6. Click Submit parameters.

After a minute, the charger appears in Tap. If it doesn’t, reboot the charger.


  1. Under Where is the charger?, choose New location and enter the address, or pick an Existing location.
  2. On You’re all set, choose what to do next, or tap Go to my location.