Elecq / Deta onboarding guide
Last updated:
You need an account in the Elecq installer app. Add the charger to your own Individual or Organisation Account. Installers: switch into your customer’s account first.
Set Tap as the OCPP server in the Elecq installer app
Section titled “Set Tap as the OCPP server in the Elecq installer app”-
On the home screen, tap Create New Site and enter the site address.
-
Select Set Up Circuit.
-
Complete the circuit and network details.
-
Make sure Charging Schedule is Off.
-
Select OCPP Server and choose Tapelectric.

-
Check that OCPP Server shows Tapelectric.

-
Add your chargers. The first one you add becomes the master. Keep adding until every charger on the site is in the list.
-
In step 3 of 4, review your settings.
-
In step 4 of 4, the app tests the settings. When the test is finished, tap Complete and close the app.
Add the charger in Tap
Section titled “Add the charger in Tap”-
With Manage selected at the top, open your location on the Home tab, tap Chargers, then Connect new chargers. For a new location, tap + below your locations on the Home tab.
-
Search for Elecq / Deta and tap Select.

-
Enter the charger ID and tap Add.
- Locations > Connect new chargers, or click Connect new chargers on a location page.
- Under Choose your charger brand, search for Elecq / Deta and click it.
- Check that ocpp Server shows Tapelectric, and wait for the charger under Your chargers.
After a minute, the charger shows up and you can set its location.
Set the location
Section titled “Set the location”- Under Where is the charger?, choose New location and enter the address, or pick an Existing location.
- On You’re all set, choose what to do next, or tap Go to my location.
- Under Your chargers, check that the charger is listed, then click Continue.
- Complete the Set location and Location settings steps.