CTEK onboarding guide
Last updated:
You need a laptop and a USB cable to connect to the charger. On Windows, first install the CCU drivers from the CTEK website; on macOS and Linux the driver is built in. Add the charger to your own Individual or Organisation Account. Installers: switch into your customer’s account first.
Copy your Tap URL
Section titled “Copy your Tap URL”-
With Manage selected at the top, open your location on the Home tab, tap Chargers, then Connect new chargers. For a new location, tap + below your locations on the Home tab.
-
Search for CTEK and tap Select.

-
Copy the URL.
-
Locations > Connect new chargers, or click Connect new chargers on a location page.
-
Under Choose your charger brand, search for CTEK and click it.
-
Next to OCPP URL, click Copy.

Set Tap as the backend on the charger
Section titled “Set Tap as the backend on the charger”- Open the charger and connect the USB cable from your laptop to the mini USB port on the controller board.
- In a web browser, go to http://192.168.7.2.
- Sign in with the default login from CTEK’s manual.
- Go to Configuration > Backend and enter a ChargeboxID.
- Set the communication protocol to v1.6.
- Paste the URL from Tap.
- Click Save at the bottom of the page.
- Reboot the charger.
After a minute, the charger appears in Tap.
Set the location
Section titled “Set the location”- Under Where is the charger?, choose New location and enter the address, or pick an Existing location.
- On You’re all set, choose what to do next, or tap Go to my location.
- Under Your chargers, check that the charger is listed, then click Continue.
- Complete the Set location and Location settings steps.