Loxone onboarding guide
Last updated:
You need Loxone Config and access to the Miniserver the Wallbox is connected to. The first-generation Miniserver (Gen. 1) doesn’t support the OCPP Server Connector. Add the charger to your own Individual or Organisation Account. Installers: switch into your customer’s account first.
Copy your Tap URL
Section titled “Copy your Tap URL”-
With Manage selected at the top, open your location on the Home tab, tap Chargers, then Connect new chargers. For a new location, tap + below your locations on the Home tab.
-
Search for Loxone and tap Select.

-
Copy the URL.
-
Locations > Connect new chargers, or click Connect new chargers on a location page.
-
Under Choose your charger brand, search for Loxone and click it.
-
Copy the ocpp Server Connector - Server Address.

Add the OCPP Server Connector in Loxone Config
Section titled “Add the OCPP Server Connector in Loxone Config”-
Open Loxone Config and connect to your Miniserver.
-
Under Network Periphery, add an OCPP Server Connector.

-
Open the new connector. Under Settings, paste the Tap URL into Server Address.

-
Select the new Charging_point_1 and rename it to TapElectric.
-
In its Settings, enter the Charging point ID you want to use.
-
Connect the new API Connector (AC) to the Loxone Wallbox block and the NFC Code Touch block.

-
Set Authentication to 4 = OCPP.
-
Save the program to the Miniserver.
After a minute, the charger appears in Tap.
Set the location
Section titled “Set the location”- Under Where is the charger?, choose New location and enter the address, or pick an Existing location.
- On You’re all set, choose what to do next, or tap Go to my location.
- Under Your chargers, check that the charger is listed, then click Continue.
- Complete the Set location and Location settings steps.