Skip to content

Schneider onboarding guide

Last updated:

Instructions for

You need access to the Schneider EV Charging Expert portal. Schneider chargers don’t support OCPP smart charging profiles, so smart charging from Tap doesn’t work on them. Add the charger to your own Individual or Organisation Account. Installers: switch into your customer’s account first.

  1. With Manage selected at the top, open your location on the Home tab, tap Chargers, then Connect new chargers. For a new location, tap + below your locations on the Home tab.

  2. Search for Schneider and tap Select.

    Selecting your charger brand in the Tap app

  3. Copy the URL.


Set Tap as the supervision in EV Charging Expert

Section titled “Set Tap as the supervision in EV Charging Expert”
  1. Sign in to the Schneider EV Charging Expert portal.

  2. Install the station: ADMIN > Station Installation > Discover Stations.

  3. Set the station name and Box Identity. You can also set the IP address here.

  4. Add the station to a zone: Admin > Zone/Station Configuration.

  5. Go to Admin > Configuration > Remote Supervision and turn Enable on.

  6. In Remote Supervision URL Address, paste the URL you copied from Tap and click Save.

    Remote Supervision settings in EV Charging Expert

  7. Reboot the charger.

After a minute, the charger appears in Tap.


  1. Under Where is the charger?, choose New location and enter the address, or pick an Existing location.
  2. On You’re all set, choose what to do next, or tap Go to my location.