Autel AC onboarding guide
Last updated:
You need an Autel account for the Autel Config app. There are several versions of the app: use the latest one. Add the charger to your own Individual or Organisation Account. Installers: switch into your customer’s account first.
Set Tap as the OCPP server in the Autel Config app
Section titled “Set Tap as the OCPP server in the Autel Config app”-
Open the Autel Config app and sign in.
-
Add your charger: scan the QR code on the Quick Guide that came with the charger, or enter the charger’s serial number and PIN.
-
Select the charger.
-
Connect to it over Bluetooth, then set up Wi-Fi (2.4 GHz networks only).
-
If the app offers a firmware update, install it.
-
Select OCPP Server and choose Tap Electric 2026.

The charger reboots itself.
Add the charger in Tap
Section titled “Add the charger in Tap”-
With Manage selected at the top, open your location on the Home tab, tap Chargers, then Connect new chargers. For a new location, tap + below your locations on the Home tab.
-
Search for Autel AC and tap Select.

-
Enter the Autel charger ID and tap Add.
-
Locations > Connect new chargers, or click Connect new chargers on a location page.
-
Under Choose your charger brand, search for Autel AC and click it.
-
Under Charger ID, enter the Autel charger ID and click + Add.

After a minute, the charger shows up and you can set its location.
Set the location
Section titled “Set the location”- Under Where is the charger?, choose New location and enter the address, or pick an Existing location.
- On You’re all set, choose what to do next, or tap Go to my location.
- Click Continue, then complete the Set location and Location settings steps.