Vestel onboarding guide
Last updated:
You need to be near the charger with a laptop or phone. Add the charger to your own Individual or Organisation Account. Installers: switch into your customer’s account first.
Copy your Tap URL
Section titled “Copy your Tap URL”-
With Manage selected at the top, open your location on the Home tab, tap Chargers, then Connect new chargers. For a new location, tap + below your locations on the Home tab.
-
Search for Vestel and tap Select.

-
Copy the URL.
-
Locations > Connect new chargers, or click Connect new chargers on a location page.
-
Under Choose your charger brand, search for Vestel and click it.
-
Copy the Central System Address.

Set Tap as the central system in the Vestel web interface
Section titled “Set Tap as the central system in the Vestel web interface”-
Turn on the charger.
-
On your laptop or phone, connect to the charger’s Wi-Fi. The network name is the charger’s serial number and the password is its Chargebox ID.
-
In a browser, go to 192.168.1.1.
-
Sign in with the default login from Vestel’s manual. We recommend changing the password afterwards.
-
If the charger connects to the internet by Wi-Fi, set up your network under Network Interfaces.
-
Open OCPP Settings. Change OCPP Connection from Disabled to Enabled. Leave OCPP Version at OCPP 1.6.

-
In Central System Address, paste the URL you copied from Tap.
-
In Charge Point ID, enter the charger ID you want to use.
-
Set AuthorizationCacheEnabled to True. The charger then stores valid cards, which helps if it goes offline.

-
Click Save.
After a minute, the charger appears in Tap.
Set the location
Section titled “Set the location”- Under Where is the charger?, choose New location and enter the address, or pick an Existing location.
- On You’re all set, choose what to do next, or tap Go to my location.
- Under Your chargers, check that the charger is listed, then click Continue.
- Complete the Set location and Location settings steps.