Siemens VersiCharge onboarding guide
Last updated:
You need a login for the Siemens Sifinity Setup app. Siemens has a user manual for the app. Add the charger to your own Individual or Organisation Account. Installers: switch into your customer’s account first.
Commission the charger in the Sifinity Setup app
Section titled “Commission the charger in the Sifinity Setup app”-
Sign in to the Sifinity Setup app and connect to your charger. You can scan the Siemens QR code, enter the charger’s serial number, or connect to the charger’s Wi-Fi.
-
Connect the charger to the internet by Wi-Fi, Ethernet or cellular (SIM card). Siemens supports 2.4 GHz Wi-Fi networks with a password.
-
On the Charger settings screen, enter tapelectric in Charger group code.

-
Complete the commissioning and tap Finish commissioning.
-
Note the charger’s serial number. This is the charger ID you enter in Tap.
Add the charger in Tap
Section titled “Add the charger in Tap”-
With Manage selected at the top, open your location on the Home tab, tap Chargers, then Connect new chargers. For a new location, tap + below your locations on the Home tab.
-
Search for Siemens and tap Select.

-
Enter the charger ID and tap Add.
-
Locations > Connect new chargers, or click Connect new chargers on a location page.
-
Under Choose your charger brand, search for Siemens and click it.
-
Under Charger ID, enter the charger ID and click + Add. The screen also shows charger group code: tapelectric.

After a minute, the charger shows up and you can set its location.
Set the location
Section titled “Set the location”- Under Where is the charger?, choose New location and enter the address, or pick an Existing location.
- On You’re all set, choose what to do next, or tap Go to my location.
- Click Continue, then complete the Set location and Location settings steps.