ICS onboarding guide
Last updated:
First update the charger to the latest firmware. You need a laptop, phone or tablet near the charger. Add the charger to your own Individual or Organisation Account. Installers: switch into your customer’s account first.
Copy your Tap server details
Section titled “Copy your Tap server details”-
With Manage selected at the top, open your location on the Home tab, tap Chargers, then Connect new chargers. For a new location, tap + below your locations on the Home tab.
-
Search for ICS and tap Select.

-
Note the Port, Domain and Path.
-
Locations > Connect new chargers, or click Connect new chargers on a location page.
-
Under Choose your charger brand, search for ICS and click it.
-
Note the Port, Domain and Path. Each has a Copy button.

Set Tap as the server in the ICS portal
Section titled “Set Tap as the server in the ICS portal”-
On your device, connect to the Wi-Fi network named on the charger’s label, using the default Wi-Fi password from ICS’s installation guide.
-
In a browser, go to 192.168.10.1 to open the ICS portal.
-
Sign in with the installer login from ICS’s installation guide. If the portal asks you to set a new password, don’t use special characters, and write it down: ICS can’t reset it.
-
Go to Basic > Server.
-
Under Endpoint, select User Defined.
-
Enter the Domain, Port and Path from Tap.
-
Under Security Profile, select wss + HttpBasic.
-
In Identity, enter the charger’s serial number.

-
Click Submit.
-
Reboot the charger.
After a minute, the charger appears in Tap.
Set the location
Section titled “Set the location”- Under Where is the charger?, choose New location and enter the address, or pick an Existing location.
- On You’re all set, choose what to do next, or tap Go to my location.
- Under Your chargers, check that the charger is listed, then click Continue.
- Complete the Set location and Location settings steps.