Mennekes AMTRON/AMEDIO onboarding guide
Last updated:
You need to be at the charger with a laptop and a micro USB cable. Add the charger to your own Individual or Organisation Account. Installers: switch into your customer’s account first.
Copy your Tap URL
Section titled “Copy your Tap URL”-
With Manage selected at the top, open your location on the Home tab, tap Chargers, then Connect new chargers. For a new location, tap + below your locations on the Home tab.
-
Search for Mennekes and tap Select.

-
Copy the URL.
-
Locations > Connect new chargers, or click Connect new chargers on a location page.
-
Under Choose your charger brand, search for Mennekes and click it.
-
Copy the JSON OCPP URL. The screen also shows OCPP-mode: OCPP-J 1.6.

Set Tap as the backend in the Mennekes web interface
Section titled “Set Tap as the backend in the Mennekes web interface”- Connect the charger to your laptop with a micro USB cable.
- In a browser, go to http://192.168.123.123.
- Sign in with username operator and the password from the datasheet that came with the charger.
- Go to Backend > OCPP and choose how the charger connects to the internet:
- Wired (LAN): select Ethernet.
- Tap SIM card: select GSM. Then go to Network > GSM, set Access Point Name (APN) to Tapelectric and click Save.
- Go back to Backend > OCPP. OCPP ChargeBoxIdentity (ChargePointID) is filled in with the serial number. Leave it as it is.
- Set OCPP-mode to OCPP-J 1.6.
- In JSON OCPP URL, paste the URL you copied from Tap.
- Click Save & Restart.
After a minute, the charger appears in Tap.
Set the location
Section titled “Set the location”- Under Where is the charger?, choose New location and enter the address, or pick an Existing location.
- On You’re all set, choose what to do next, or tap Go to my location.
- Under Your chargers, check that the charger is listed, then click Continue.
- Complete the Set location and Location settings steps.