ETAPpro onboarding guide
Last updated:
You need access to the ETAPpro portal. It uses the same login as the ETAPpro app. Add the charger to your own Individual or Organisation Account. Installers: switch into your customer’s account first.
Copy your Tap URL
Section titled “Copy your Tap URL”-
With Manage selected at the top, open your location on the Home tab, tap Chargers, then Connect new chargers. For a new location, tap + below your locations on the Home tab.
-
Search for ETAPpro and tap Select.

-
Copy the URL.
-
Locations > Connect new chargers, or click Connect new chargers on a location page.
-
Under Choose your charger brand, search for ETAPpro and click it.
-
Next to custom CPO Endpoint, click Copy.

Set Tap as the CPO endpoint in the ETAPpro portal
Section titled “Set Tap as the CPO endpoint in the ETAPpro portal”- Go to the ETAPpro portal and sign in with your ETAPpro app login.
- On the home screen, click Add charger.
- Enter the charger’s serial number (on the back of the charger) and click Continue.
- Enter the access code from the passport card (the card with the QR code) that came with the charger, and click Continue.
- On the charger’s detail screen, click Edit Charger.
- Enter a name for the charger.
- Set OCPP to ON.
- Next to CPO Endpoint, tick Custom.
- Paste the URL from Tap. Make sure it ends with a forward slash (/), or the charger won’t connect.
- Click Save.
- Restart the charger: unplug it from power, then plug it back in.
After a minute, the charger appears in Tap.
Set the location
Section titled “Set the location”- Under Where is the charger?, choose New location and enter the address, or pick an Existing location.
- On You’re all set, choose what to do next, or tap Go to my location.
- Under Your chargers, check that the charger is listed, then click Continue.
- Complete the Set location and Location settings steps.