Zaptec (for ManCos) onboarding guide
Last updated:
The charger already connects to Tap, so you only add it to your own Tap account. Not taking over from a builder? See Zaptec onboarding guide. Add the charger to your own Individual or Organisation Account.
Add the charger in Tap
Section titled “Add the charger in Tap”-
With Manage selected at the top, open your location on the Home tab, tap Chargers, then Connect new chargers. For a new location, tap + below your locations on the Home tab.
-
Search for Zaptec (For ManCos) and tap Select.

-
Enter the Zaptec serial number and tap Add.
-
Locations > Connect new chargers, or click Connect new chargers on a location page.
-
Under Choose your charger brand, search for Zaptec (For ManCos) and click it.
-
Under Charger ID, enter the Zaptec serial number and click + Add.

After a minute, the charger shows up and you can set its location.
Set the location
Section titled “Set the location”- Under Where is the charger?, choose New location and enter the address, or pick an Existing location.
- On You’re all set, choose what to do next, or tap Go to my location.
- Click Continue, then complete the Set location and Location settings steps.
If the builder already put QR code stickers on the chargers, link each sticker to its charger as part of onboarding. The Charger Management Quick Start explains how.