Teison onboarding guide
Last updated:
You make these changes on the charger’s touchscreen. Teison chargers only support 2.4 GHz Wi-Fi. Add the charger to your own Individual or Organisation Account. Installers: switch into your customer’s account first.
Copy your Tap URL
Section titled “Copy your Tap URL”-
With Manage selected at the top, open your location on the Home tab, tap Chargers, then Connect new chargers. For a new location, tap + below your locations on the Home tab.
-
Search for Teison and tap Select.

-
Copy the URL.
-
Locations > Connect new chargers, or click Connect new chargers on a location page.
-
Under Choose your charger brand, search for Teison and click it.
-
Copy the ocpp URL1.

Set Tap as the OCPP server on the charger
Section titled “Set Tap as the OCPP server on the charger”-
On the charger’s screen, tap the settings button in the top-right corner.
-
Open Internet Setting, select your Wi-Fi network and enter its password.

-
Go back to the settings menu and open OCPP Setting.
-
In OCPP ID, enter the charger ID you want to use. The charger’s serial number works well.
-
In OCPP URL 1, paste the URL you copied from Tap.
-
Turn on the switch to the right of OCPP URL 1.

After a minute, the charger appears in Tap. If it doesn’t, restart the charger.
Set the location
Section titled “Set the location”- Under Where is the charger?, choose New location and enter the address, or pick an Existing location.
- On You’re all set, choose what to do next, or tap Go to my location.
- Under Your chargers, check that the charger is listed, then click Continue.
- Complete the Set location and Location settings steps.