Injet (Eco - AC) onboarding guide
Last updated:
You need a phone near the charger. Add the charger to your own Individual or Organisation Account. Installers: switch into your customer’s account first.
Copy your Tap URL
Section titled “Copy your Tap URL”-
With Manage selected at the top, open your location on the Home tab, tap Chargers, then Connect new chargers. For a new location, tap + below your locations on the Home tab.
-
Search for Injet (Eco - AC) and tap Select.

-
Copy the URL.
-
Locations > Connect new chargers, or click Connect new chargers on a location page.
-
Under Choose your charger brand, search for Injet (Eco - AC) and click it.
-
Next to ocpp Server URL, click Copy.

Set Tap as the OCPP server on the charger
Section titled “Set Tap as the OCPP server on the charger”-
Power up the charger.
-
On your phone, open the Wi-Fi settings and select the network starting with EVSE.
-
In your phone’s browser, go to 192.168.4.1.
-
Enter the password: the last 8 characters on the sticker on the side of the charger. Tap Login.

-
Set a new password when asked, and sign in.
-
Open the General tab and enter the charger ID (from the sticker) under SN.

-
Set up the internet connection in the WLAN and/or 4G tabs.
-
Open the OCPP tab and set OCPP Version to OCPP 1.6.
-
In OCPP Server URL, paste the URL from Tap. Click Save.
After a minute, the charger appears in Tap. If it doesn’t, reboot the charger.
Set the location
Section titled “Set the location”- Under Where is the charger?, choose New location and enter the address, or pick an Existing location.
- On You’re all set, choose what to do next, or tap Go to my location.
- Under Your chargers, check that the charger is listed, then click Continue.
- Complete the Set location and Location settings steps.