Alpitronic onboarding guide
Last updated:
You need local access to the hypercharger’s configuration interface (see Alpitronic’s hypercharger documentation). Add the charger to your own Individual or Organisation Account. Installers: switch into your customer’s account first.
Copy your Tap URL
Section titled “Copy your Tap URL”-
With Manage selected at the top, open your location on the Home tab, tap Chargers, then Connect new chargers. For a new location, tap + below your locations on the Home tab.
-
Search for Alpitronic and tap Select.

-
Copy the URL.
-
Locations > Connect new chargers, or click Connect new chargers on a location page.
-
Under Choose your charger brand, search for Alpitronic and click it.
-
Next to webSocketUrl, click Copy.

Set Tap as the backend on the hypercharger
Section titled “Set Tap as the backend on the hypercharger”-
Connect to the charger’s configuration interface and sign in.

-
To set your internet connection, open Network. Using a Tap SIM card? See the section below first.
-
Go to OCPP > BOOT.INI FILE.
-
Enter these fields:
- chargePointIdentity: the charger’s serial number
- msgEngineType: json
- WebSocketUrl: the URL you copied from Tap

-
Click Save Configuration.
-
On the home page, click Reset to reboot the charger.
After a minute, the charger appears in Tap.
Using a Tap SIM card
Section titled “Using a Tap SIM card”-
Go to Network > SIM > APN configuration.
-
In APN, enter Tapelectric.
-
Select No APN Authentication Required and click Save Configuration.

-
Go to Network > Preferred Network.
-
Change the default network to Mobile Connection and click Change Network.
Set the location
Section titled “Set the location”- Under Where is the charger?, choose New location and enter the address, or pick an Existing location.
- On You’re all set, choose what to do next, or tap Go to my location.
- Under Your chargers, check that the charger is listed, then click Continue.
- Complete the Set location and Location settings steps.