Wallbox onboarding guide
Last updated:
You need a Wallbox account in the myWallbox app, with the charger added and online (see Wallbox’s OCPP setup guide). Add the charger to your own Individual or Organisation Account. Installers: switch into your customer’s account first.
Copy your Tap URL
Section titled “Copy your Tap URL”-
With Manage selected at the top, open your location on the Home tab, tap Chargers, then Connect new chargers. For a new location, tap + below your locations on the Home tab.
-
Search for Wallbox and tap Select.

-
Copy the URL.
-
Locations > Connect new chargers, or click Connect new chargers on a location page.
-
Under Choose your charger brand, search for Wallbox and click it.
-
Next to OCPP URL, click Copy.

Turn on OCPP in the myWallbox app
Section titled “Turn on OCPP in the myWallbox app”- In the myWallbox app, select your charger and check that it’s connected to the internet.
- Tap the Settings cogwheel.
- Under External Management, select OCPP and turn it on.
- Paste the Tap URL into the URL field.
- In Charge Point ID, enter the charger’s unique ID.
- If your charger has a password, enter it.
- Save the settings. The charger restarts, and an OCPP icon appears on its overview screen in the app.
After a minute, the charger appears in Tap.
Set the location
Section titled “Set the location”- Under Where is the charger?, choose New location and enter the address, or pick an Existing location.
- On You’re all set, choose what to do next, or tap Go to my location.
- Click Continue, then complete the Set location and Location settings steps.
If the charger doesn’t connect
Section titled “If the charger doesn’t connect”- Restore the charger to its factory settings and wait for it to restart (about 15 minutes).
- Enter the OCPP settings again (see above) and wait for the restart (about 5 minutes).
- Check whether the charger shows up in Tap.
- Still not connected? Update the charger to the latest software (about 5 minutes) and check again.