Skip to content

Peblar onboarding guide

Last updated:

Instructions for

You need the Peblar Quick Start Guide that came with the charger, a phone or laptop, and an internet connection for the charger: a LAN cable, a nano-SIM with an open network, or a Tap Electric nano-SIM. Add the charger to your own Individual or Organisation Account. Installers: switch into your customer’s account first.

  1. With Manage selected at the top, open your location on the Home tab, tap Chargers, then Connect new chargers. For a new location, tap + below your locations on the Home tab.

  2. Search for Peblar and tap Select.

    Selecting your charger brand in the Tap app

  3. Copy the URL.


Set Tap as the backoffice in the Peblar config page

Section titled “Set Tap as the backoffice in the Peblar config page”
  1. On your phone or laptop, connect to the charger’s Wi-Fi. In the Peblar Quick Start Guide, the network name is the Hostname and the password is the WLANPassword.

  2. In a browser, open the Config page URL from the Quick Start Guide. Enter the config page password if asked, then click Get Started.

    The Peblar config page welcome screen

  3. Set up your Wi-Fi network if the charger uses Wi-Fi.

  4. Complete the charger’s electrical settings for your installation.

  5. In Authorization, select Managed.

  6. Under Backoffice, choose the Tap Electric option that matches the charger’s internet connection, for example Tap Electric (with Tap Electric SIM).

  7. Backoffice URL already starts with wss://ocpp.tapelectric.app/. After it, paste the rest of the URL you copied from Tap.

    Backoffice settings in the Peblar config page

  8. Click Save, then Next.

  9. Click Finish & reboot.

After a minute, the charger appears in Tap.


  1. Under Where is the charger?, choose New location and enter the address, or pick an Existing location.
  2. On You’re all set, choose what to do next, or tap Go to my location.