Autel DC Onboarding Guide
Last updated:
Autel DC chargers usually come from the Autel factory already set up for Tap Electric. If yours isn’t, contact Autel to set Tap as the backend. Add the charger to your own Individual or Organisation Account. Installers: switch into your customer’s account first.
Get the charger online
Section titled “Get the charger online”- Power on the charger and commission it as Autel recommends.
- Connect the charger to the internet.
Add the charger in Tap
Section titled “Add the charger in Tap”-
With Manage selected at the top, open your location on the Home tab, tap Chargers, then Connect new chargers. For a new location, tap + below your locations on the Home tab.
-
Search for Autel DC and tap Select.

-
Enter the charger’s serial number and tap Add.
-
Locations > Connect new chargers, or click Connect new chargers on a location page.
-
Under Choose your charger brand, search for Autel DC and click it.
-
Under Charger ID, enter the charger’s serial number and click + Add.

After a minute, the charger shows up and you can set its location.
Set the location
Section titled “Set the location”- Under Where is the charger?, choose New location and enter the address, or pick an Existing location.
- On You’re all set, choose what to do next, or tap Go to my location.
- Click Continue, then complete the Set location and Location settings steps.