Raedian onboarding guide
Last updated:
You need the Raedian Installer app and the charger’s PIN code. Add the charger to your own Individual or Organisation Account. Installers: switch into your customer’s account first.
Copy your Tap URL
Section titled “Copy your Tap URL”-
With Manage selected at the top, open your location on the Home tab, tap Chargers, then Connect new chargers. For a new location, tap + below your locations on the Home tab.
-
Search for Raedian and tap Select.

-
Copy the URL.
-
Locations > Connect new chargers, or click Connect new chargers on a location page.
-
Under Choose your charger brand, search for Raedian and click it.
-
Copy the URL. It starts with
ws://.
Add a Tap OCPP profile in the Raedian Installer app
Section titled “Add a Tap OCPP profile in the Raedian Installer app”-
Open the Raedian Installer app, then create an account and sign in.
-
Select your Raedian model.

-
Tap Connect Wallbox and enter the charger’s PIN code.
-
Check that the charger’s location is set correctly.
-
Update the charger firmware. When the update is done, tap Reset Device. The charger reboots.
-
Under Connectivity, set up the charger’s internet connection.
-
Open OCPP Profile. In ChargePointSerialNumber, enter the charger’s serial number.
-
Tap the OCPP Profile field, then + to add a profile. Enter the URL exactly as shown in Tap, starting with
ws://, and tap Save.
After a minute, the charger appears in Tap. If it doesn’t, reboot the charger.
Set the location
Section titled “Set the location”- Under Where is the charger?, choose New location and enter the address, or pick an Existing location.
- On You’re all set, choose what to do next, or tap Go to my location.
- Under Your chargers, check that the charger is listed, then click Continue.
- Complete the Set location and Location settings steps.