Charge-M8 onboarding guide
Last updated:
You need to be at the charger: you change the settings on its touch screen. Charge-M8 chargers come set up for Charge-M8’s own platform; if you can’t change the settings, contact Charge-M8. Add the charger to your own Individual or Organisation Account. Installers: switch into your customer’s account first.
Find your Tap server details
Section titled “Find your Tap server details”-
With Manage selected at the top, open your location on the Home tab, tap Chargers, then Connect new chargers. For a new location, tap + below your locations on the Home tab.
-
Search for Charge-m8 and tap Select.

-
Note the Server IP and OCPP Path.
-
Locations > Connect new chargers, or click Connect new chargers on a location page.
-
Under Choose your charger brand, search for Charge-m8 and click it.
-
Note the Server IP and OCPP Path. Each has a Copy button.

Set Tap as the server on the charger
Section titled “Set Tap as the server on the charger”-
On the charger’s screen, tap the four-squares icon at the bottom left of the main menu.

-
Tap Settings, then Configs, and enter the engineer’s master password. It’s in the pack that came with the charger; if you’ve lost it, contact the Charge-M8 helpline.

-
Leave Work Mode set to Online.
-
Leave Charger Number at its default, which is the charger’s serial number.
-
In OCPP Path, enter the OCPP Path from Tap.

-
In Server IP, enter the Server IP from Tap.
-
Tap Save.
After a minute, the charger appears in Tap.
Set the location
Section titled “Set the location”- Under Where is the charger?, choose New location and enter the address, or pick an Existing location.
- On You’re all set, choose what to do next, or tap Go to my location.
- Under Your chargers, check that the charger is listed, then click Continue.
- Complete the Set location and Location settings steps.