Enelion onboarding guide
Last updated:
You need to be at the charger: you set it up through its Wi-Fi hotspot. Add the charger to your own Individual or Organisation Account. Installers: switch into your customer’s account first.
Copy your Tap URL
Section titled “Copy your Tap URL”-
With Manage selected at the top, open your location on the Home tab, tap Chargers, then Connect new chargers. For a new location, tap + below your locations on the Home tab.
-
Search for Enelion and tap Select.

-
Copy the URL.
-
Locations > Connect new chargers, or click Connect new chargers on a location page.
-
Under Choose your charger brand, search for Enelion and click it.
-
Next to OCPP Address, click Copy.

Set Tap as the management system on the charger
Section titled “Set Tap as the management system on the charger”-
Power up the charger.
-
On a phone or computer, connect to the Wi-Fi network EnelionChargerXXX (XXX is the last three characters of the communication module’s serial number). By default it has no password.
-
In a browser, go to http://192.168.8.8 and sign in as administrator, using the default login from Enelion’s manual.
-
Check under Network > Overview that the charger has an internet connection.
-
Go to OCPP > Connection and select Connect to specified Management System.
-
In OCPP address, paste the URL from Tap.
-
In StationID, enter a name for the charger.

-
Click Save.
-
On the dashboard, check that the OCPP Status tile shows Accepted.
After a minute, the charger appears in Tap.
Set the location
Section titled “Set the location”- Under Where is the charger?, choose New location and enter the address, or pick an Existing location.
- On You’re all set, choose what to do next, or tap Go to my location.
- Under Your chargers, check that the charger is listed, then click Continue.
- Complete the Set location and Location settings steps.