Skip to content

Rolec Connect onboarding guide

Last updated:

Instructions for

You need the Rolec Connect app, which replaces Rolec’s older Rolec EV Connect app. Have an older Rolec with a GreenFlux controller? See Rolec GreenFlux onboarding guide. Add the charger to your own Individual or Organisation Account. Installers: switch into your customer’s account first.

Select Tap Electric in the Rolec Connect app

Section titled “Select Tap Electric in the Rolec Connect app”
  1. Open the Rolec Connect app. The first time, it asks you to scan the charger’s QR code. You’ll find it on the back of the Rolec setup guide or inside the charger.

  2. Go to Configure your chargepoint > Back Office.

  3. Under Endpoint URL, choose Tap Electric.

  4. Note the Charge Point ID.

    Choosing Tap Electric as the back office in the Rolec Connect app

  5. Tap Next Step and finish the process.

If Rolec’s onboarding website asks you to choose a back office, choose Alternative back-office.


  1. With Manage selected at the top, open your location on the Home tab, tap Chargers, then Connect new chargers. For a new location, tap + below your locations on the Home tab.

  2. Search for Rolec Connect and tap Select.

    Selecting your charger brand in the Tap app

  3. Enter the Charge Point ID and tap Add.

After a minute, the charger shows up and you can set its location.


  1. Under Where is the charger?, choose New location and enter the address, or pick an Existing location.
  2. On You’re all set, choose what to do next, or tap Go to my location.