Onboarding in this context means getting the charger communicating with Tap. If you are looking for a complete guide for setting up an account and configuring your locations, see our Quick Start Guide.
To connect Snigg chargers, you will need to be physically located at the charger with a laptop and a micro USB cable.
1. In the Tap app: Locations > connect new charger
2. Select Snigg.
3. Copy your unique URL from the Tap app or webportal.
4. Connect the charger to your laptop with a micro USB cable.
5. Open a web browser on the laptop. Enter the URL: http://192.168.123.123
6. Login using the following credentials:
Username: operator
Password: yellow_zone
7. Navigate to Backend > Connection. The next step depends on whether you are using a wired (Ethernet) internet connection, or a Tap SIM card.
Wired/Ethernet Internet Connection
Wired/Ethernet Internet Connection
Select "Ethernet".
Nagivate to Backend > OCPP
Your OCPP ChargeBoxIdentity (ChargePointID) will be pre-filled. Leave this ID as is.
Set OCPP-mode to "OCPP-J 1.6".
In "JSON OCPP URL", paste the URL you copied in the Tap app.
Click Save and Restart.
Return to the Tap app. After a minute the charger should appear and you can proceed with onboarding.
Tap SIM Card
Tap SIM Card
Select "GSM".
Navigate to Network > GSM.
Enter Access Point Name (APN): Tapelectric
Click Save.
Nagivate to Backend > OCPP
Your OCPP ChargeBoxIdentity (ChargePointID) will be pre-filled. Leave this ID as is.
Set OCPP-mode to "OCPP-J 1.6".
In "JSON OCPP URL", paste the URL you copied in the Tap app.
Click Save and Restart.
Return to the Tap app. After a minute the charger should appear and you can proceed with onboarding.
