Onboarding in this context means getting the charger communicating with Tap's charger backoffice. If you are looking for a complete guide for setting up an account and configuring your locations, see our Quick Start Guide.
To connect a Enphase charger, you will need a login to the Enphase Installer Toolkit App.
Step 1: IQ EV Charger installation and commissioning
Install and commission the IQ EV Charger using the Enphase Installer Toolkit App. You can add the charger to an existing site or create a new site specifically for the IQ EV Charger.
If you're the owner and wish to commission your IQ EV Charger using the Enphase App after installation, you can follow the steps in this Commissioning guide
Step 2: Enphase app setup for using IQ EV Charger
Owners can customize their IQ EV Charger for optimal use via the Enphase App by following the setup guides below
For IQ EV Charger only sites without Enphase Solar or Battery system: App setup guide (standalone)
For IQ EV Charger on sites with Enphase Solar or Battery systems: App setup guide (integrated)
Step 3: Partner integration request by owners.
Once the IQ EV Charger is installed and commissioned, owners can follow the below steps to initiate the Partner integration.
Go to Menu -> Settings -> IQ EV Charger -> Partner Integration
Once on partner integration page select Tap Electric as the partner.
Go through the details and give consent to grant access of your system to Tap Electric.
Step 4: finish onboarding in the Tap app
Open the Tap app. Navigate to Locations > connect new charger
13. Select Enphase IQ EV.
14. Select Enter Charger ID.
15. After a minute the charger should appear in the list and you can proceed with onboarding.
